Flyer Mountain, Original Instruction Manual

Page: 279 / 412

28
5.8 Error display
Press the “Mode” button to acknowledge the error
display . Once you have acknowledged it, the dis-
play disappears .
The error code gives a precise description of the
error .
5.9 Message display
Current messages are shown on the main menu
of the display for information purposes .
1.
2.
3.
4.
1 . USB charging active
2 . Motor overheated (“Motor overheated” warning
was displayed and acknowledged . The motor
power is reduced as a protective measure . Let
the drive unit cool down and restart the system)
3 . Service message (service recommendation
from your specialist retailer)
4 . Error message (error was displayed and ack-
nowledged . Rectify the error and restart the
system)
5.10 Settings menu
Access the settings menu by holding down the
“Mode” button for at least 3 seconds . You can only
open the settings menu while stationary .
5.11 Menu structure
i . Reset
i . Trip Reset
ii . Factory Reset
ii . Basic settings
i . Language
ii . Time
iii . Units
iii . My FLYER
i . Assistance
ii . Light
iii . Automatic light
iv . Service
v . Wheel circumference
vi . Auto-Mode
iv . About
5.12 Menu navigation
Use the + and - assistance level buttons to navi-
gate the menu and configure the values. Press
the “Mode” button to access sub-menus or con-
firm an action. Press the light button to leave the
current menu .