Fluke DDS Function Generator 271, User Manual

Page: 103 / 132

Remote Operation
Remote Commands
16
16-13
SWPSRC <cpd>
Set sweep source to
<CONT>
(continuous),
<EXT>
(external)
or
<MAN>
(manual)
*TRG
Executes a trigger which will have the same effect as pressing
the
MAN/SYNC
key.
MAN/REMOTE
trigger source must be
selected first. GPIB Group Execute Trigger command (
GET
)
will perform the same function as
*TRG
.
Trigger and Gate
TRIG <cpd>
Set trigger mode to
<ON>
or
<OFF>
GATE <cpd>
Set gate mode to
<ON>
or
<OFF>
TRIGSRC <cpd>
Set trigger source to
<EXT>
,
<MAN>
or
<TGEN>
GATESRC <cpd>
Set gate source to
<EXT>
,
<MAN>
or
<TGEN>
TGEN <nrf>
Set trigger generator period to
<nrf>
seconds
BCNT <nrf>
Set burst count to
<nrf>
cycles
PHASE <nrf>
Set phase to
<nrf>
degrees
*TRG
Executes a trigger which will have the same effect as pressing
the
MAN/SYNC
key.
MAN/REMOTE
trigger source must be
selected first. GPIB Group Execute Trigger command (
GET
)
will perform the same function as
*TRG
.
AM Parameters
AM <cpd>
Set AM mode to
<ON>
or
<OFF>
AMSRC <cpd>
AM source to
<EXT>
or
<TGEN>
TGEN <nrf>
Set trigger generator period to
<nrf>
seconds
AMDEPTH <nrf>
Set internal AM depth to
<nrf>
%
AMWAVE <cpd>
Set internal AM wave to
<SINE>
or
<SQUARE>
FSK Parameters
FSK <cpd>
Set FSK mode to
<ON>
or
<OFF>
FSKFRQA <nrf>
Set main generator frequency to
<nrf>
Hz (for completeness
only)
FSKPERA <nrf>
Set main generator period to
<nrf>
seconds (for
completeness only)
FSKFRQB <nrf>
Set FSK frequency B to
<nrf>
Hz
FSKPERB <nrf>
Set FSK period B to
<nrf>
seconds
FSKSRC <cpd>
Set FSK source to <EXT>, <MAN> or <TGEN>
TGEN <nrf>
Set trigger generator period to
<nrf>
seconds
*TRG
Executes a trigger which will have the same effect as pressing
the
MAN/SYNC
key.
MAN/REMOTE
trigger source must be
selected first. GPIB Group Execute Trigger command (
GET
)
will perform the same function as
*TRG
.
1.888.475.5235 info@Fluke-Direct.com
Fluke-Direct
.com