Operator's Manual
|
5-1
5 Ventilator Setup and Use
5.1
Introduction
Familiarize yourself with the instructions in this section prior to ventilating
patients with the HT FLIGHT 50 Ventilator. Following all of the listed steps is
essential to ensuring the safest possible operation of the ventilator. Use the
information in this section in conjunction with established hospital protocols
and homecare dealer instructions.
Non-medical home caregivers must have complete training
and demonstrate competency in proper set up, use,
troubleshooting and maintenance of the FLIGHT 50
Ventilator prior to use. They must have a planned response
to emergencies and must comply with appropriate infection
control procedures.
This section provides instructions for both Pressure Control
and Volume Control ventilation. Follow the sections specific
to the type of ventilation required for your patient(s).
5.2
Assembling the Ventilator
Before assembling the ventilator, review the assembly set up shown in
Figure 49 and familiarize yourself with the various components. Remove all
of the items from the shipping box and inspect each part and component for
completeness and to verify that there is no shipping damage. Complete the
Order Review Form and Warranty Card, and process as per the instructions.
The complete assembly consists of the following parts:
FLIGHT 50 Ventilator — Select one:
FLIGHT 50 Ventilator (home care/hospital use) with built-in
humidifier
FLIGHT 50 Ventilator (home care/hospital/transport use) without
built-in humidifier
Includes:
1 ea. FLIGHT 50 Operator’s Manual
1 ea. V24-00900-90 F50 US Power Cord
1 ea. V64-50040-60 F50 Single Use Patient Circuit
1 ea. V11-35300-60 Air Intake Filter Disposable (pk. of 5
filters)
