Specifications
SYMBOLS and SPECIFICATIONS
Operator's Manual
|
2-5
Message Display Window
Up to 16 characters, LED alpha
numeric display. Displayed
monitored parameters:
V
T
(Actual delivered tidal volume)
V
I
(Inspiratory minute volume)
ƒ
(Total breath frequency)
Paw P (Peak airway pressure)
Paw M (Mean airway pressure )
Paw B (Baseline airway pressure)
H (Hours of operation)
S (Software version)
L (or Q) (Buzzer volume (Loud or Quiet) for audible alarm)
Other displayed parameters
(In USER SET UP):
Power Save (On / Off)
Airway Pressure Units (cmH
2
O / mbar)
Set Up (User / Default)
Auto Panel Lock (Enabled / Disabled)
Tech. Setup (Technical set up, refer to Service Manual)
Front Panel Indicators
Modes:
A/CMV
SIMV
SPONT
Green LED indicates that A/CMV mode is active.
Green LED indicates that SIMV mode is active.
Green LED indicates that SPONT mode is active.
Controls:
Volume Control
Pressure Control
Green LED indicates Volume Control ventilation.
Green LED indicates Pressure Control ventilation.
Alarms:
▲
Paw (High Pressure)
▼
Paw (Low Pressure) / Apnea
Device Alert
▲
I
(High Insp. Min. Volume)
▼
I
(Low Insp. Min. Volume)
(Back-Up Vent)
Red LED indicates high peak airway pressure, high baseline
pressure, or occlusion alarm violation.
Red LED indicates low peak airway pressure, low baseline
pressure, apnea, or PCV (50% of PCV setting not achieved)
alarm violation.
Red LED indicates ventilator malfunction alert.
Red LED indicates high inspiratory minute volume alarm
limit is violated.
Red LED indicates low inspiratory minute volume alarm limit
is violated.
Miscellaneous Indicators
Silence / Reset
Yellow LED indicates that the audible alarm is silenced for 60
seconds.
Auto Lock On
Green LED indicates that the panel is currently locked.
On / Standby
Green LED indicates that the FLIGHT 50 is ventilating.
Ptrig
Green LED blinks on to indicate patient breathing effort.
