Flexa CWT GALAXY Use And Maintenance Manual Download

Page: 28 / 94

3.2.1 Arrangement of fixed protective casing and safety photocells

The following figure shows the location of the protective casing and safety photocells present on the machine.

Fixed protective casing: these are mounted on the machine structure with removable plastic rivets.

Safety photocell composed of emitter and receiver.

The machine is equipped with a safety light curtain to safeguard hands from possible crushing. The light curtain is

active during the machine autotest and when the rollers are turning.

To reset the safety photocells, see par. 7.9.

GALAXY
USE AND MAINTENANCE MANUAL

MANUAL CODE: 756100330_EN

REVISION: 0

DATE: 07/03/2019

FLEXA S.r.l. - Partial or whole reproduction prohibited without authorisation

Summary of Contents for CWT GALAXY































































































Search results

Summary of Contents for CWT GALAXY

Reviews:

Related manuals for CWT GALAXY

Brands by name

Popular brands

Flexa CWT GALAXY, Use And Maintenance Manual

Search results

Summary of Contents for CWT GALAXY

Reviews:

Related manuals for CWT GALAXY

Brands by name

Popular brands