Flexa CWT GALAXY, Use And Maintenance Manual

Page: 67 / 94

1.
2.
3.
7.20 Cutting unit adjustment and blade replacement procedure
To replace the cutting blade:
Remove the screws (E).
Replace the cutting blade (D).
Reposition the cutting blade (D) and tighten the screws (E).
Machine conditions: Machine stopped.
Authorised personnel: Operator.
Personal protective equipment: See par. 3.4 or PPE IMAGE.
Necessary equipment: Screwdriver.
To adjust the cutting unit:
Loosen the knob (A) to move the cutting unit (B) along
the guide.
1.
Tighten the knob (A) to lock the cutting unit (B) in a
desired position.
2.
Cut the paper, loosen the knob (C) and position the
blade (D).
3.
Tighten the knob (C).
4.
If the cutting blade (D) is worn, change the side of the cutting edge or replace it.
GALAXY
USE AND MAINTENANCE MANUAL
EN
MANUAL CODE: 756100330_EN
REVISION: 0
DATE: 07/03/2019
FLEXA S.r.l. - Partial or whole reproduction prohibited without authorisation
59