Flexa CWT GALAXY, Use And Maintenance Manual

Page: 58 / 94

7.15 Material centring procedure
The material rolls must be centred on the machine to prevent imbalances in material tension and working pressure.
Optimal lamination is achieved working at the centre of the machine, even for small size materials.
The dimensions of the materials must be equivalent to prevent excess adhesive lamination with respect to the image
to be laminated. An extra area of maximum 2 cm is permitted. With extra areas over 2 cm, the adhesive lamination can
stick to the worktops and make feeding of the material difficult, resulting in the forming of creases.
Optimal lamination is achieved when the image to be laminated is larger than the film to be applied.
GALAXY
USE AND MAINTENANCE MANUAL
EN
MANUAL CODE: 756100330_EN
REVISION: 0
DATE: 07/03/2019
FLEXA S.r.l. - Partial or whole reproduction prohibited without authorisation
50