Flexa CWT GALAXY, Use And Maintenance Manual

Page: 60 / 94

Pressure adjustment
Follow the procedure below to adjust pressure:
Move the upper roller in contact with the print using the corresponding
hand-wheel.
1.
Turn the hand-wheel further counter-clockwise, the roller pressure will
increase.
2.
View roller pressure by how the LEDs light up:
3.
Green LED: ideal pressure
●
Orange LED: high pressure
●
Red LED: pressure too high
●
Turn the hand-wheel clockwise to decrease roller pressure.
The image shows creases, a typical lamination defect due to
too much pressure.
GALAXY
USE AND MAINTENANCE MANUAL
EN
MANUAL CODE: 756100330_EN
REVISION: 0
DATE: 07/03/2019
FLEXA S.r.l. - Partial or whole reproduction prohibited without authorisation
52