Flexa CWT GALAXY Use And Maintenance Manual Download

Page: 29 / 94

3.2.2 Arrangement of emergency stop devices and the main electrical switch

A. Emergency buttons

B. Main electrical switch.

The machine is equipped with emergency stop buttons that can immediately stop the operating cycle.

Emergency buttons must not be used as ordinary stop commands.

To restart after an emergency stop, see par. 7.5.

In the event of an emergency stop with the rollers hot, restart roller rotation as soon as possible. If the machine

remains stationary for a prolonged amount of time, move the rollers away from each other.

GALAXY
USE AND MAINTENANCE MANUAL

MANUAL CODE: 756100330_EN

REVISION: 0

DATE: 07/03/2019

FLEXA S.r.l. - Partial or whole reproduction prohibited without authorisation

Summary of Contents for CWT GALAXY































































































Search results

Summary of Contents for CWT GALAXY

Reviews:

Related manuals for CWT GALAXY

Brands by name

Popular brands

Flexa CWT GALAXY, Use And Maintenance Manual

Search results

Summary of Contents for CWT GALAXY

Reviews:

Related manuals for CWT GALAXY

Brands by name

Popular brands