8.2 Descriptions of the symbols used in the maintenance chapter
This paragraph describes the symbols used in the maintenance chapter.
8.3 Routine maintenance
Routine maintenance is the set of operations that must be performed at a defined frequency. They are intended to keep the
machine in good operating condition.
8.3.1 Routine maintenance summary table
Abbreviations for types of interventions: E = Electrical; M = Mechanical; S = Software
Icon used
Description
Mechanical type intervention
Electrical type intervention
Specifies the frequency of interventions
Caution
Perform routine maintenance with precision and at the frequency indicated by the manufacturer.
The table reported in the paragraph 8.3.1 "Routine maintenance summary table" indicates all the recommended
interventions, indicates the frequency with which they will have to be performed and, in the last column, shows the
paragraph describing the procedure to be performed for the operation.
Routine maintenance table
Type
Description
Frequency
Reference
M
Casing removal procedure
When needed
8.3.2
E
Photocell replacement / adjustment
When needed
8.3.3
M
General cleaning
Daily
8.3.4
M
Lifting screw lubrication
Every 6 months
8.3.5
M
Chain lubrication
Ogni anno
8.3.6
GALAXY
USE AND MAINTENANCE MANUAL
EN
MANUAL CODE: 756100330_EN
REVISION: 0
DATE: 07/03/2019
FLEXA S.r.l. - Partial or whole reproduction prohibited without authorisation
72
Summary of Contents for CWT GALAXY
Page 2: ......
Page 93: ......
Page 94: ...FLEXA Sr l reserves the right to make technical changes to this manual without prior notice...