7.19 Spindle shaft replacement procedure
Spindle shaft removal
Machine conditions:
Machine stopped.
Authorised personnel:
2 operators.
Personal protective equipment:
See par. 3.4 or PPE IMAGE.
Necessary equipment:
Lifting device.
Spindle shaft handling must be performed by two operators or by means of a lifting device.
The movement of the axes is greatly facilitated if performed at the rear of the machine.
Manually rotate the spindle shaft (A) until the locking pin (B) is in a
horizontal position.
●
Lift and tilt the spindle shaft (A) to extract the pivot pin (B) from the
support (C).
●
At the opposite end of the spindle shaft (A), pull the pivot pin (D) out of
the locking pin (E).
●
GALAXY
USE AND MAINTENANCE MANUAL
EN
MANUAL CODE: 756100330_EN
REVISION: 0
DATE: 07/03/2019
FLEXA S.r.l. - Partial or whole reproduction prohibited without authorisation
57
Summary of Contents for CWT GALAXY
Page 2: ......
Page 93: ......
Page 94: ...FLEXA Sr l reserves the right to make technical changes to this manual without prior notice...
