Flexa CWT GALAXY, Use And Maintenance Manual

Page: 38 / 94

5.3 Unpacking
Below are instructions for correct unpacking of the machine.
Remove the outer packaging, taking care not to damage the machine.
The original packaging, including the pallet, must be kept for any shipment of the machine to the manufacturer. It will
be the manufacturer's discretion whether to accept machines without the original packaging.
1. Remove the external packaging.
2. Check the machine conditions, paying particular attention to:
Side panelling.
●
Rubber roller lining: must be perfectly smooth, free of fingerprints, bubbles, grooves, missing portions or cuts.
●
Drive pedal (no cracks or damaged cable).
●
Spindle axes: must be intact, positioned on their supports, free of dents and complete in all parts.
●
Contact the manufacturer if any damage is noted. Photograph the damage and send photos to the manufacturer.
3. Cut the straps holding the machine to the pallet.
Caution
The straps are pulled taut. Move to the side of them at an arm's distance and cut them.
GALAXY
USE AND MAINTENANCE MANUAL
EN
MANUAL CODE: 756100330_EN
REVISION: 0
DATE: 07/03/2019
FLEXA S.r.l. - Partial or whole reproduction prohibited without authorisation
30