Fleischmann PROFI-BOSS 686601, Operating Instructions Manual

Page: 23 / 31

41
❖
Menu maximum speed :
Here you can set the value for the
maximum speed of your loco
(value area 0-255).
Input via the keyboard or the
❖
Menu trim forwards :
Here you can set the value for the
trim forwards (=individual suitable speed)
of your loco (value area 0-255).
Input via the keyboard or the
❖
Menu trim backwards :
Here you can set the value for the
trim backwards (=individual suitable
speed) of your loco (value area 0-255).
Input via the keyboard or the
❖
Menu speed steps :
Here you can select between
28/128 speed steps
or 14 speed steps.
Selection via the
Referring to the table on pages 30/31, we can
now look at some additional menu points (
❖
).
1. Level / 2. Main menu: Program on main
In the 1st level you will find the main menu
Program on Main (in short: POM )
❖
Menu CV-direct input :
Here you can set the CV value (value
area 0-255) for every CV number (area
from 1-1024).
Input via the keyboard or the
Switch between the CV number and CV
value with .
Confirm the input with PROG.
❖
Menu acceleration inertia :
Here you can set the value for the
acceleration inertia of your loco
(value area 0-255).
Input via the keyboard or the
❖
Menu braking inertia :
Here you can set the value for the
slow-down inertia of your loco
(value area 0-255).
Input via the keyboard or the
❖
Menu minimum speed :
Here you can set the value for the
minimum speed of your loco
(value area 0-255).
Input via the keyboard or the
❖
Menu medium speed :
Here you can set the value for the
medium speed of your loco
(value area 0-255).
Input via the keyboard or the
40
Expert Knowledge Expert Knowledge