For everyone who does not yet want to go
deeper, but wants to get going straight
away, the quick entry instructions are set
out here (steps 1-6).
If you just want to use the PB to run the loco
in your start set, for example, and want to
start running it straight away, then proceed as
follows:
1.
Connect up the PB using the
cable set
included. Simply insert the
rectangular
western plug into the central socket A of the
PB.
2.
Set up the track layout as described on the
packaging, clipping the
track feed clips
onto
the track (alternatively, you may have a feed
track with two wires in the set). (see the
instruction leaflet).
3.
Connect the two ”free” cables of the PB
cable set
(violet/grey wires)
with the track
feed clips (alternatively, the track feed wires).
4.
Using the
plug-in transformer
provided,
(or alternatively the suitable transformer 6811
and accompanying connecting cable 38
6865) insert the plug into the
round socket.
5.
The display of the
PB will now light up.
Place the loco on the track, and as soon as
you
turn the red knob
the train will set off.
By turning the knob in the oposite direction,
the loco will run the other way.
6. Emergency Stop:
press the red knob.
Off we go!
Basic Knowledge
The
indicator elements
(Display) are:
Pictograms, text and numbers on
the PB-display (fig. 2):
As desired, you can alter the contrast, bright-
ness and menu language (pre-set in German).
See additional chapter for instructions
(”Expert knowledge“).
Menus available to select are shown on the
lower border of the display (in Fig. 2:
LOK,
MAG, FUNC
and
F0
). According to the vari-
ous display menus, the functions of the 4
uppermost row of keys varies depending on
the display.
By pressing the corresponding keys, the
menu commands can be carried out. You can
access the display by rotating the red control
knob and/or the relevant key on the key-
board.
The PB is childishly simple to operate.
2.2 Connecting up and Off you Go
Now let’s connect up the PROFI-BOSS!
Fig.2 PROFI-BOSS Start display
9
8
Basic Knowledge
