You have already found out how to select the
menu points
, change between menu levels,
in short, the operation and we shall be utilis-
ing this knowledge in the following
sequences.
We have set out a table on the following
pages which shows ALL of the possible set-
tings of the PROFI-BOSS.
Changing between menu levels is
only pos-
sible
when the lower level menu is
also
shown in the display.
If you wish to select a loco that is not already
stored in the FLEISCHMANN-databank, sim-
ply type in the address and confirm it with the
”SEL“
key. Now you’ve got this loco on the
control knob (and in the display).
29
If your loco has more than10 functions avail-
able, then by using the
”alt“
key, the extra
functions F11 – F20 will be displayed.
Using the ”alt“ key again will return to the
functions F1 – F10.
For functions greater than F20 (in prepara-
tion), however, you will have to access the
functions via the
”FUNC“
key, input the
F
(unction)
number
and the
ON/OFF
keys.
(You can of course, already do this with F1 –
F20, but it is not so convenient).
In the following chapters,
EXPERT KNOW-
LEDGE
, we will delve deeper into the func-
tions of the PROFI-BOSS.
You will learn lots more about
changing
addresses,
individual
loco settings, favourite
points, my databank
, in short, all the setting
variations which the PROFI-BOSS offers.
28
Initial Knowledge
Initial Knowledge
