The
class 76 (Sound loco), along with all its
pre-programmed capabilities
will appear in
the operational menu.
Just as an example, we will
turn off
the fac-
tory setting for the
inertia F6
until we have
gained a little more operational expertise.
In the display, you will find
F6
shown as a
”ramp“ with a ”tick“ = on, above the
number ”6“.
➙
Press
the key ”
6
“
The tick over the pictogram symbol ”ramp“
will now change to a ”cross“ = off.
(pressing the key ”6“ again will switch the
inertia back on again).
Press the function you desire on the keyboard
(i. e. for F3 the key ”3“) and again it will be
switched on- or off!
You can do this with any of the loco functions
F1 – F20 because the display will inform you
of the current setting of any of them.
27
➙
Press
the key
LOK for about 1 second
The library of loco addresses (= databank)
together with the class designation will
appear. We are looking for the class - BR 76.
We can scroll up or down through the library
list by either using the
UP
or
DOWN
....
keys, or by simply rotating the control knob
.......
left or right.
➙
Turn
the red control knob clockwise
until the line
”76 * BR 76“
is highlighted by the surrounding frame.
This example shows the called up FLEISCH-
MANN-databank as
pre-installed
in the
PROFI-BOSS, with the small star between
the address number and the class indicator.
You will find further information about the
databank and loco list under
”Expert Know-
ledge“
.
But let’s now return to our example:
➙
Confirm
your selection by pressing
SEL
key.
26
* is the indication of the FLEISCHMANN databank
Initial Knowledge
Initial Knowledge