You can access the
”settings“
menu by
pressing and holding the
”C“
key and then
pressing the
”alt“
key.
Important:
In order to ensure that the PROFI-BOSS
stores your alterations,
you must confirm
the input with
”OK“
or
”PROG“
(according to
the menu display).
Beginning with the 1st (menu) level, together
with the adjoining lower level, we will now
describe all the settings which you can
access from the PROFI-BOSS.
1. 1. Level/1. Main menu: locomotive
1. 1. lower menu: loco address
In the
Loco address
menu, you can change
the loco address to one of your choice. Place
the loco which you wish to change the
address (i.e. the standard address 3) on the
track. If several locos are already on the
track, then take all the others which you do
not wish to change off of the track.
If this is not possible, then simply select the
menu
”program on main“
and follow the
advice under this menu point.
Another alternative for changing the address
is to place the loco on an isolated section, a
so-called ”programming track“ and then
change the address using the menu ”loco-
motive/loco address“.
The remainder of the layout where the other
locos are, must be isolated from the PROFI-
BOSS (i. e. with a switch).
33
32
PROFI-BOSS
Version
-
Speed steps
128
28
14
Start loco number
loco selection
DataBase 123
numerical
Alpha
Contrast
Contrast
Brightness
Brightness
German
French
Italian
English
German
Dutch
Swedish
Master
Master
Slave
RESET works settings
1. Level
2. Level
3. Level
Expert Knowledge
Expert Knowledge
