Flavor Burst TS 44BEV, User Manual

Page: 50 / 100

49
3. Use the ampule provided to prime the area
within the markings before mounting the
Touchscreen bracket.
4. With the bracket still assembled, remove the
protective covering from the adhesive strip
on the bottom of the bracket plate. Carefully
place the assembly within the markings and
hold in place.
5. Unscrew the hand knobs from the bracket
plate and remove the Touchscreen
Assembly, allowing the bottom plate to
remain on the freezer. Allow the bottom
plate adhesive to cure for 24 hours.
NOTE: IF THE ADHESIVE HAS NOT CURED
LONG ENOUGH OR IF THE SURFACE IS
NOT CLEAN, THE BRACKET MAY NOT STAY
IN PLACE. THIS COULD RESULT IN THE
TOUCHSCREEN ASSEMBLY FALLING OFF
THE FREEZER.
6. When the plate has had time to cure, mount
the Touchscreen Assembly back onto the
plate. Tighten the hand knobs to secure.