Flavor Burst TS 44BEV, User Manual

Page: 74 / 100

73
6. If no flavor is desired (i.e.
– to draw vanilla),
simply deselect any selected flavor entry by
pressing it and draw a serving.
Enabling the Timed Serving Size Draw Mode
Timed serving size draw mode alerts the
operator to finish a serving according to the size
selected on the Touchscreen. In this mode,
carryover is automatically reduced because
flavor flow is programmed to stop just before
the alert is given to stop drawing the product.
1. From the main menu screen, press the
SETUP key in the upper left corner. Enter
the password if required.
2. Press the SPOUT A MAINTENANCE key
(or SPOUT B MAINTENANCE if you wish to
set up timed serving size draw mode on the
spout to the right).
7. Select SPOUT A SETUP OPTIONS (or
SPOUT B SETUP OPTIONS).
3. Ensure the box next to ENABLED TIMED
SERVING SIZE is selected. Touch the box
to select it.
NOTE:
INJECTOR FLUSH AND DISPENSE
INSTRUCTIONS SCREEN ARE OPTIONAL
FEATURES WITHIN THE TIMED SERVING
SIZE MODE. HOWEVER, IF YOU ARE
TESTING THIS FEATURE FOR THE FIRST
TIME, SELECT ONLY THE “ENABLE
INJECTOR FLUSH” BOX TO PROCEED TO
THE NEXT SECTION.
NOTE:
“ENABLE AUTO DISPENSE MODE”
AND “ENABLE FCB PURGE” ARE FOR USE
WITH FROZEN CARBONATED BEVERAGE
SYSTEMS ONLY.
NOTE:
“ENABLE SELF SERVE MODE” IS
NOT FUNCTIONAL WITH THE TIMED
SERVING SIZE MODE.
4. Press the DONE key in the upper right
corner of the screen.
5. To use the timed serving size draw mode
for both freezers, repeat these instructions
for the other spout. The spouts can be set
for different draw modes; you may set the
standard manual draw mode on one, with
the timed serving size mode on the other.
6. To adjust the size for each individual size,
see the
“Setting Serving Size Timing”
section.