Flavor Burst TS 44BEV, User Manual

Page: 85 / 100

84
Accessing the Prime Syrup Pump Mode
When switching out one syrup bag for another
flavor in the same tray, it is necessary to clean
and sanitize the syrup line so that no residual
flavor comes through with the new flavor. The
Prime Syrup Pump mode allows the individual
pumps to pump only syrup or only sanitizer
solution (when connected to the pump flush
tube) through the line without dispensing
product. The Prime Syrup Pump mode is used
when winterizing the unit and also in the Clean-
In-Place process, detailed in the SCHEDULED
MAINTENANCE section.
1. From the main menu screen, press the
SETUP key in the upper left corner. Enter
the password if required.
2. Press the SPOUT A MAINTENANCE key
(or SPOUT B MAINTENANCE if the syrup
dispenses from Spout B).
3. Press the PRIME SYRUP PUMP key.
4. Place a container under the Blending Head
spout. Select the flavor / pump for priming
and syrup will begin to flow. Press the key
again to stop the syrup flow.
5. Press the INJECTOR FLUSH key to
sanitize the Blending Head.
6. Repeat Steps 4 and 5 for any other flavors
that need to be primed.
7. Press DONE to return to the main screen.
8. Repeat these instructions to prime the syrup
pumps and lines for the other freezer.