Fischer Panda 45i pms, User Manual

Page: 61 / 212

Installation Instructions
8.10.14 Kapitel/Chapter 6: Installation Instructions - Seite/Page 61
Fig. 6.3-1: Generator connections
Fig. 6.3-2: Generator connections
6.4 Installation of the cooling system - raw water
6.4.1 General information
The genset should have its own raw water (coolant water) inlet and should not be connected to any other engine
systems. Ensure that the following installation instructions are complied with:
6.4.2 Fischer Panda installation kit - raw water
Note:
The following additional components will be required for the
specified installation. You can purchase them as an installation
kit or separately at Fischer Panda.
1 2 3
4 5 6 7 8 9
10
11
12 13
1. Raw water inltake
2. Fuel supply (in)
3. Fuel return line (out)
4. Cable for fuel pump
5. Motor oil drain hose
6. Cable for iControl panel
7- Cable for generator output AC out
8. Cable for PMGi control
9. Passage for starter battery cable (-)
10. Passage for starter battery cable (+)
11. Exhaust out
12. Connection from the externel expension tank
13. Connection to the externel expension tank
1
1. Connection external ventilation valve