Fischer Panda 45i pms, User Manual

Page: 57 / 212

Installation Instructions
8.10.14 Kapitel/Chapter 6: Installation Instructions - Seite/Page 57
6. Installation Instructions
ATTENTION!
The PMGi cable must be secured at the generator and at the
PMGi with appropriate safety devices.
Attention!: Adapt system correctly.
All connections (hoses, wires etc.) and installation instructions
are designed and suited for “standard” installation situations.
In situations where Fischer Panda has no detailed information concerning
certain installation requirements (such as vehicle specifications, maximum
vehicle speed - and all other conditions concerning special operating situa-
tions) the installation instructions should be used as an example guide only.
The installation must be undertaken and proved by a suitable qualified/
trained person and should be in accordance with the law as required by the
country and special situation.
Damages caused by faulty or incorrect installation are not covered by the
warranty.
6.1 Personal requirements
The described installation must be done by a technical trained person or a Fischer Panda service point.
6.1.1 Hazard notes for the installation
Notice:
see “Safety first!” on Page 14.
Follow the general safety instruction at the front of this manual.
.
Warning!: Automatic start
DANGER TO LIFE! - Incorrect handling may lead to health dam-
age and to death.
Always disconnect the battery bank (first negative terminal than positive ter-
minal) before you work at the generator or the electric system of the genera-
tor so that the generator may not be started unintentionally.
Warning!: Risk of injury
Improper installation can result in severe personal injuries or
material damage. Therefore:
• Always undertake installation work when the generator is
switched off.
• Ensure there is sufficient installation clearance before start
working.
• Ensure tidiness and cleanliness at the workplace. Loose
components and tools lying around or on top of each other
are sources of accidents.