3.6
Sketch
For all Series A WaveShapers except the 100A, the Sketch application provides a powerful and intuitive graphical user interface for
controlling the attenuation, phase, group delay or dispersion of a WaveShaper in real time. With a double-click of a mouse, users
can create data points in the WaveShaper frequency spectrum and, based on the selection of the interpolation method between
the data points, Sketch creates a visual representation of the profile which is loaded into the attached WaveShaper device in real
time.
Sketch provides graphical tools to create, drag and drop, single data points and area selected sets of data points. It has selected
area zoom in and full view reset capability for the graphical view. The created filters can be saved as Preset Point Data files for
future use and exported as WaveShaper Preset (
*.wsp) files for later downloading direct to supported WaveShapers.
3.7
Mode
Mode Selection
Select what is to be controlled from a drop-down menu. For
the 500A, only the attenuation option is available. When the
Phase, Group Delay and Chromatic Dispersion are selected, a
second graph will appear below the attenuation sketch graph.
A grid can be applied to the second graph for ease of
selection.
WaveShaper A Series User Manual
13
