Port Selection 16000A
For the 16000A all ports are indicated by two characters. The
first character is the input port and the second is the output
port. The default configuration file is 4x16 and the default
value for this configuration is A-1. The user can use the drop
down control to select any of the 64 available output ports.
The port selection list will be different for each configuration
and the port list will change depending on the configuration
that is currently active.
4x16 configuration, 64 ports, default A-1
1x19 configuration, 19 ports, default A-B
8x12 configuration, 96 ports, default A-5
10x10 configuration, 100 ports, default A-7
To select any of the other available configurations, use the
WaveShaper Configuration option in the Tools tab.
3.10
Graph Control
DRAW
Allows you to directly manipulate points on the sketch trace. See the section on
Modifying Points for more details.
PAN
Allows you to grab the trace and move it to a different part of the graph. The
axes numbers will update automatically. To RESET, use the ZOOM icon and
zoom out.
ZOOM
Allows you to zoom in on an area of interest. To Zoom IN, drag with the mouse
from top left to bottom right. To Zoom OUT or RESET the graph, drag the
mouse from bottom right to top left on the graph. The axes numbers will
update automatically.
WaveShaper A Series User Manual
17
