Cubic Hermite
Produces a rounded profile when the points are
selected. The points can be adjusted for both
attenuation (vertical direction) or frequency
(horizontal direction).
Frequency Lock
When frequency lock is switched on, the frequencies
of any existing points are locked and they can only
be dragged in the vertical (y-) direction (attenuation
adjustment). This allows for the manipulation of the
set channels.
Port
The Port Selector Control is only available for the 4000A and
16000A range of Series A WaveShapers. Port Control is not
available if a WSP file is selected. This allows the user to select
the port to which the output is directed.
Port Selection 4000A
The default value after start-up is Port 1. The user can use the
drop down control to select any of the 4 available output
ports.
WaveShaper A Series User Manual
16
