EN
134
8.14 Storage and dismantling
8.14.1 Storage of the equipment or prolonged stop
If the equipment is not used immediately or is stored for long periods, check that it is correctly packed and contact Fimer for storage
instructions.
The equipment must be stored in well-ventilated indoor areas having no characteristics that could damage the components of the
equipment.
Restarting after a long or prolonged stop requires a check and, in some cases, the removal of oxidation and dust that will also have settled
inside the equipment if not suitably protected.
8.14.2 Dismantling, decommissioning and disposal
Fimer is not responsible for disposal of the equipment, or part of it, which does not take place on the basis of the regulations and laws in
force in the country of installation.
The symbol of the cancelled bin (where present) indicates that the product must not be disposed with domestic waste at the
end of its useful life.
This product must be delivered to the waste collection point of the local community for recycling.
For further information, refer to the public body responsible for waste disposal in the country.
Inappropriate disposal of waste can have a negative impact on the environment and human health owing to potentially dangerous
substances.
By cooperating in the correct disposal of this product, you contribute to the reuse, recycling and recovery of the product, and the protection
of our environment.
Dispose of the various types of materials that the parts of the equipment consist of in dumps that are suitable for the purpose.
COMPONENT
MATERIAL OF CONSTRUCTION
Frame, brackets, supports
Arc-welded steel FE37, aluminium
Casing or covers
ABS, plastic
Paint
RAL
Gaskets and seals
Rubber / Teflon / Viton
Electrical cables
Copper / Rubber
Cable trays
Polyethylene / Nylon
Batteries
Nickel / Lead/ Lithium
