EN
48
4.4 List of supplied components
The table below shown the available component in the wiring box
(02)
package (common for all models):
Component
Quantity
ALARM and AUX relay
(33)
and RS485
(38)
connectors (pre-installed on
communication and control board
(28)
)
4
Remote ON/OFF
(37)
connector (pre-installed on communication and control
board
(28)
)
1
Two-hole gasket (6mm Ø) for PG21 signal cable glands
(12)
and cap
2 + 2
M8x16 hex bolt + M8 serrated lock washers to clamp the earth cable on the
protective earth point (ext.)
(10)
1 + 2
M10 hex nut + M10 serrated lock washers to clamp the earth cable on the
protective earth point (int.)
(25)
1 + 2
Key tool for front cover quarter cam-lock
(05)
1
WARNING!
NRS 097-2-1:2017 (South Africa)
It is not intended to connect this Inverter to a network with an higher
Network Impedance.
Reference Impedance
Fault Level
0.156
1475
Total [ Ω ]
I_SC [ A ]
3.9
1018
X/R ratio
S_SC [kVA] (three phase)
South africa network standard label
1
Technical documentation
1
The table below shown the available components for wiring box
(02)
Standard and -S2 version only:
Component
Quantity
MPPT input parallel bar
1
M6 screws with washer to clamp the MPPT input parallel bars
2
The table below shown the available components for wiring box
(02)
-SX, -SY, -SX2 and SY2 version only:
Component
Quantity
Positive string fuses (gPV - 1000Vdc - 20A)
24
Fuse puller (secure touch)
1
The table below shown the available component in the power module
(01)
package:
Component
Quantity
M6x20 junction screws
(32)
between wiring box and power module
2
M6 self-locking nut to clamp internal AC cables on AC interconnection board
(58)
3
M5 hex nut + M5 serrated lock washers to clamp the internal earth cable on PE
interconnection point
(64)
1 + 2
The table below shown the available component in the bracket
(03)
package:
Component
Quantity
M8 bolts with washers for mechanically securing the half-brackets
2
M6 screws for mechanically securing the wiring box to the bracket
2
