Fimer PVS-100-TL B2 Product Manual Download Page 94

Page: 94 / 136

7.5.4 USER menu

In the USER section it’s possible to logout from Web User Interface

and return to the login page, or to access the following sub-menus:

EDIT EMAIL AND PASSWORD

ADMIN PLUS

USER MANAGEMENT

7.5.4.1 EDIT EMAIL AND PASSWORD

In the Edit Email and Password sub-menu you can change the

e-mail and password related to the user which is used to login to

the Web User Interface.

7.5.4.2 ADMIN PLUS

By accessing to the Admin Plus sub-menu you can obtain the

“Admin Plus” user privileges which allow you to:

• View and edit the AC Settings, Reactive Power Control, Ramp

Control, Active Power Control and Frequency Control: P(f) sub-

menus on SETTINGS section.

• Change the grid standard of the inverter, after 24 hours while

the inverter is operating (so the Country Standard sub-menu on

SERVICE TOOLS section was locked).

• Access the “Reset Manufacturing” sub-menu on SERVICE

TOOLS section.

To access on the Web User Interface with the “Admin Plus”

user privileges it’s required to enter a security token that can be

obtained by registering on the website

https://registration.solar.

fimer.com

(Refer to

““Registration website” and “Admin Plus

token””

paragraph for further informations).

7.5.4.3 USER MANAGEMENT

By accessing to the User Management sub-menu it’s possible to

edit all the users already created and create new users (both with

admin or User privileges).

7.5.5 CONNECTIVITY menu

In the CONNECTIVITY section it’s possible to access the following

sub-menus:

LAN

WLAN

RS485

DEBUG SETTINGS

MODBUS

7.5.5.1 LAN

In the LAN sub-menu it’s possible to view the status and change

the daisy chain configuration of the two ethernet ports

(39)

(40)

of the inverter.

• Daisy chain configuration: DHCP or Static:

By selecting the DHCP function (default setup) the router will

automatically assign a dynamic IP address to the inverter

whenever it tries to connect to the user network.

With Static, the user can assign a fixed IP address to the system.

The data which has to be entered in order for IP static address

assigning to take place will appear. Complete the additional fields

at the bottom of the screen (all the fields are mandatory with the

exception of the secondary DNS server).

Summary of Contents for PVS-100-TL B2









































































































































Search results

Summary of Contents for PVS-100-TL B2

Reviews:

Related manuals for PVS-100-TL B2

Brands by name

Popular brands

Fimer PVS-100-TL B2, Product Manual

Search results

Summary of Contents for PVS-100-TL B2

Reviews:

Related manuals for PVS-100-TL B2

Brands by name

Popular brands