Fiery E-750, Configuration Manual, Page: 66 / 184

4
4-10 Performing Setup from the Control Panel
Jobs to Save
1-99 [10]
This option appears only if Enable Printed Queue is set to Yes. Specify the number of
jobs to be stored in the Printed queue. Jobs in the Printed queue take up space on the
E-750 hard disk. If disk space is low, use a smaller value for saved jobs.
Clear Each Scan Job
After 1 day/Manually/After 1 week [After 1 day]
Specify how you want to remove scanned data from the hard disk. If you select
Manually, the scanned data remains on the hard disk until specifically deleted, or until
all scanned jobs are cleared by the Administrator.
Clear Scan Job Now
Yes/ No [No]
Specify when you want to immediately clear the scan jobs from the hard disk.
Preview While RIP
Yes/ No [No]
Specify whether a preview thumbnail should be displayed in the Command
WorkStation when a job is being processed. If you select Yes, the preview thumbnail is
always displayed in the Processing section of the Activity Monitor.
Save Changes
Yes/No [Yes]
Select Yes to activate any changes made in the Server Setup; select No to return to the
main Setup menu without making any changes.