manualshive.com logo in svg

Fiery E-750, Configuration Manual, Page: 171 / 184

Share
Download
Fiery E-750 Configuration Manual Download Page 171

A

A-7

Troubleshooting

Runtime error messages

For error messages related to canceling jobs and printing, including the Disk Full 
message and alerts to load media, see the

 Job Management Guide

. These messages are 

reported by the job management tools.

You can turn on PostScript error reporting as a print option from Mac

 

OS

 

applications.

Printer not found

Most failures to find a printer on the network are due to conflicting or missing name 
or address settings for the E-750. You must enter names in specific places. The 
required names are:

• TCP/IP host name (also known as the DNS name), which is defined by your 

organization.

Enter the host name as the Server Name in E-750 Setup.

• Remote printer (internal machine) name. Use one of the following:

print

 

hold

N

OTE

:

If you change the DNS name (also known as the TCP/IP host name) of the 

E-750, you must reconfigure one of the Fiery utilities on each workstation.

Summary of Contents for E-750

























































































































































































Reviews:

No comments