Fiery E-750, Configuration Manual, Page: 14 / 184

1
1-2 Connecting to the Network
Stages of installation on the network
Installation can be performed by a network or printing administrator. The stages of a
successful installation are:
• Physically connecting the E-750 to a functioning network
Prepare a network node for the E-750—obtain cable, route it to the location where the
E-750 will be installed, and attach the cable to the network interface. For details, see
page 3-8 .
• Configuring the network server
When network servers are required, you need to configure those servers to provide
client access to the E-750 as a PCL or PostScript printer. For information on
configuring network servers in Windows and UNIX network environments, see
Chapter 2 .
• Setting up the E-750
Configure the E-750 for your particular printing and network environment. First read
Chapter 2 , and then see subsequent chapters for details.
• Preparing client workstations for printing
Install the files needed for printing, install additional user software, and connect the
client to the E-750 over the network. These steps are described in the
User Software
Installation Guide , and some information is also provided in Chapter 2 .
• Administering the E-750
Monitor and maintain system performance and troubleshoot problems that arise.
For details, see
Chapter 7 of this manual and the Job Management Guide .