Fiery E-750, Configuration Manual, Page: 47 / 184

3
3-1 Levels of access and control
To prepare for printing at your site, you must do some initial E-750 configuration, or
Setup, to specify the network environment and the kind of printing you will do. Before
you perform Setup, you must decide the levels of access you will implement for your
site. Administrators and operators must also understand how E-750 system software is
structured in order to configure and use the E-750 system correctly.
Levels of access and control
When you configure the E-750 during Setup, you (as system administrator)
implement a particular level of control by enabling or not enabling print connections,
passwords, and access to WebTools. The level of control you implement can range
from minimum to moderate to maximum—or none at all.
• Minimum control might be appropriate for a small site where anyone on the local
network can control all printing and E-750 functions. Although there may be an
administrator or operator charged with certain duties, all users have equal access to
the system and job management tools.
• Maximum control might be appropriate for a high-volume printing environment
where an administrator or operator controls the job flow and all printing; jobs sent
by users are spooled (stored) to the E-750 disk until the operator decides it is time to
print them. In addition, only the administrator and operator have access to job
management tools. This is the recommended level of control.
N
OTE
:
The term “job management tools” is used in this manual to refer to
Command WorkStation and Command WorkStation LE.
E-750 print connections
The E-750 supports three print connections: Hold queue, Print queue, and Direct
connection. These print connections can be enabled, or “published,” to users on the
network when you configure Printer Setup. All published connections are constantly
checked for the presence of jobs. The Print queue and Direct connection give remote
users more direct access to the E-750 than the Hold queue. Therefore, do not publish
the Print queue and the Direct connection in environments where maximum control is
desired.
Chapter 3:
Preparing for
E-750 Setup