Fiery E-750, Configuration Manual, Page: 39 / 184

2
2-15 E-750 on a NetWare network with NDPS
Configuring a NetWare server for printing with NDPS
Before you begin
The following procedure assumes NDPS has been installed during NetWare 5.x or
later installation and that a Broker is running on the server. Unless you have manually
unloaded the Broker, it loads and runs when you install NDPS. Make sure you are
using the latest NetWare service pack and Novell gateway. Finally, create an NDPS
Manager. For more information, see your NetWare documentation.
In E-750 Setup, make sure you have enabled TCP/IP and LPD printing on the E-750.
You can ping the E-750 to verify that TCP/IP communication is successful.
Setting up the E-750 printer driver
You first need to create a directory for Windows NT 4.0/2000/XP/Server 2003 or a
folder for Windows 98/Me in the NetWare server for NDPS to install the
corresponding printer driver files from the User Software CD.
T
O SET UP THE PRINTER DRIVER FOR
W
INDOWS
NT 4.0/2000/XP/S
ERVER
2003
1. Log on to the Novell file server as a superuser or Administrator.
2. Create a directory called Fiery in the following location:
SYS:ndps\resdir\Prndrv\NT4 for Windows NT 4.0
SYS:ndps\resdir\Prndrv\2000 for Windows 2000
SYS:ndps\resdir\Prndrv\XP for Windows XP
SYS:ndps\resdir\Prndrv\Server 2003 for Windows Server 2003
3. From the User Software CD, copy the contents of the following folder to
the Fiery directory:
ENGLISH\INSTALRS\PS_DRVR\WIN_NT for Windows NT 4.0
ENGLISH\INSTALRS\PS_DRVR\WIN_2000 for Windows 2000
ENGLISH\INSTALRS\PS_DRVR\WIN_XP for Windows XP and Windows Server 2003
T
O SET UP THE PRINTER DRIVER FOR
W
INDOWS
98/M
E
1. Log on to the Novell file server as a superuser or Administrator.
2. In the SYS:ndps\resdir\Prndrv\Win9x/Me directory, create a folder called Fiery.