manualshive.com logo in svg

Fiery E-750, Configuration Manual, Page: 137 / 184

Share
Download
Fiery E-750 Configuration Manual Download Page 137

5

5-25

Network Setup

Enable Windows Printing Service

—Select to enable SMB (Server Message Block), the 

file and printer sharing protocol built into Windows. Enabling SMB lists the E-750 on 
the network so that Windows clients can print to a particular print connection (Hold, 
Print, or Direct) on the E-750 without any other networking software. For 
information on setting up a Windows client for Windows printing, see the

 User 

Software Installation Guide

.

N

OTE

:

Windows (SMB) printing runs over TCP/IP, so you must configure TCP/IP on 

the E-750 and any computers that use Windows printing.

Server Name

—Enter the server name that will appear on the network. You can use the 

same name as the server name assigned to the E-750 (see 

page 5-3

), or choose another 

name.

Comment

—Enter information about the printer, up to 15 characters. These comments 

are listed in the Properties of the E-750 in Network Neighborhood. Lowercase letters 
are allowed in this field.

Domain or Workgroup

—Enter the workgroup or domain where the E-750

 

should appear. 

Summary of Contents for E-750

























































































































































































Reviews:

No comments