Fiery E-750, Configuration Manual, Page: 53 / 184

3
3-7 About Setup
5. An administrator and an operator; operator controls all jobs; no WebTool access
(Maximum control)
Only an administrator can perform Setup, calibration, and other administrator
functions, and only an operator or administrator can control jobs from the job
management tools; users can print only to the Hold queue; the administrator and the
operator have complete control of job flow; no access to WebTools.
About Setup
Setup configures the E-750 to communicate with other devices and manage print jobs.
You must perform Setup the first time you turn on the E-750 after new system
software is loaded, or any time Server software is reinstalled. An initial Setup using
default settings is adequate for allowing users to print to the E-750 and use the
WebTools. When your network or user printing environment changes, you can change
Setup options accordingly.
Use these settings
in Setup
1
(Minimum)
2 3 4 5
(Maximum)
Enable Direct connection Ð Ð Ð
Enable Print queue Ð Ð Ð Ð
Enable Web Services Ð Ð Ð
Set an Administrator Password
(
strongly recommended )
Ð Ð Ð Ð
Set an Operator password Ð Ð Ð