manualshive.com logo in svg

Fiery E-750, Configuration Manual, Page: 118 / 184

Share
Download
Fiery E-750 Configuration Manual Download Page 118

5

5-6

Setting up the E-750 from a Windows Computer

Network Setup

Network Setup configures the E-750 to receive print jobs over the networks used at 
your site. If the E-750 is configured to enable more than one protocol, it automatically 
switches to the correct protocol when it receives a print job. When two network ports 
are enabled, print jobs can be received over all ports at the same time.

You can view and specify the following network settings in Network Setup:

• Adapters and ports—view currently configured network adapters and port settings

• Protocols—including AppleTalk, IPX/SPX, and TCP/IP

• Print Services—including LPD printing (TCP/IP), NetWare printing (PServer), 

Windows print sharing (SMB), HTTP support (WWW), Internet Printing Protocol 
(IPP) printing, and Port 9100 printing

• E-mail Service—specify the Fiery E-mail Service

Summary of Contents for E-750

























































































































































































Reviews:

No comments