Fiery E-750, Configuration Manual, Page: 48 / 184

3
3-2 Preparing for E-750 Setup
In addition, you can enable the Printed queue, which is a storage area for the most
recent jobs from the Print queue. The Printed queue makes it convenient to reprint
those jobs. In Setup, you can enable the Printed queue and specify the maximum
number of jobs retained in the queue (see
page 4-10 ). Reprinting jobs in the Printed
queue requires the job management tools.
To use the Fiery utilities and WebTools, you must enable at least one of the
print
connections.
Hold queue
Jobs sent to the Hold queue are spooled to the E-750 hard disk for printing at a later
time or for reprinting. Because the Hold queue is a storage place, jobs sent to it cannot
proceed through the printing process until the operator intervenes using the job
management tools (see the
Job Management Guide ).
Print queue
This is the standard E-750 queue. Jobs sent to the Print queue are processed and
printed in the order they are received. Jobs prioritized by an operator with the job
management tools and jobs sent via the Direct connection can take priority over jobs
sent to the Print queue.
Direct connection
The Direct connection transmits jobs directly to the E-750, but only when the E-750
is Idle. If the E-750 is busy, the job remains at the user workstation until the E-750 is
ready. The job is then processed as soon as the previous job is finished and before the
next queued job is processed.
N
OTE
:
The Direct connection is not supported for LPR printing.
Jobs sent to the Direct connection are not stored on the E-750 hard disk, and cannot
be selected for reprinting, moving, or deletion. Therefore, the Direct connection
provides a measure of security for sensitive files. Jobs sent to the Direct connection
do
appear in the Job Log, for accounting purposes.
N
OTE
:
To download fonts to the E-750, you must publish the Direct connection.