manualshive.com logo in svg

Fiery E-750, Configuration Manual, Page: 166 / 184

Share
Download
Fiery E-750 Configuration Manual Download Page 166

A

A-2

Troubleshooting

Frame Type selection

 

(Network Setup >Protocol 
Setup >IPX/SPX  Setup)
Enable NDS
(Network Setup > Service 
Setup > PServer  Setup  > NDS 
Setup)

Invalid frame size.

The network hub is not connected to a Novell machine 
when the E-750 tries to bind.

Warning! IPX network

 

number is zero.

No other IPX machine can be found on the network, or 
the network hub is not connected to the network when the 
E-750 tries to bind. When this occurs, the network 
number defaults to zero.

No NDS trees found.

No NDS trees were found on the Novell network. Check 
to see that the frame types on the E-750 are 
properly

 

configured.

Select NDS Tree
(Network Setup > Service 
Setup  > PServer  Setup >

 

 NDS  Setup)

Warning! Selecting a new 
NDS tree deletes Bindery 
setup.

You have previously connected the E-750 to a different 
NDS tree. NetWise supports only a single NDS tree 
connection. To avoid a potential conflict with an existing 
tree connection (for example, if the connection was made 
through a NetWare 4.x server in emulation mode), all 
bindery settings will be deleted.
If you choose Set, and choose Yes in the following message 
(Delete Bindery setup and continue?), bindery settings are 
deleted and have to be re-entered in Bindery Setup.
To avoid deleting the bindery settings, press the Menu key, 
or select Set and choose No in the following message 
(Delete Bindery setup and continue?).
Repeat NDS Setup without changing the NDS tree, or exit 
to Bindery Setup to review your current bindery settings. 

Navigating NDS tree
(Network Setup > Service 
Setup  >  PServer  Setup  >

 

 NDS  Setup)

___ is empty.

The chosen container contains no sub-containers or objects 
relevant to the current mode of navigation.

Bindery Setup
(Network Setup > Service 
Setup  > PServer  Setup  >

 

 Bindery  Setup)

If you also plan to use NDS, 
set up NDS before Bindery.

No NDS settings are present. You are reminded to perform 
NDS Setup before Bindery Setup in case your network 
includes both NDS and bindery servers.

After this Setup screen

This message

Means

Summary of Contents for E-750

























































































































































































Reviews:

No comments