manualshive.com logo in svg

Fiery E-750, Configuration Manual, Page: 164 / 184

Share
Download
Fiery E-750 Configuration Manual Download Page 164

7

7-12

Administering the E-750

T

O

 

REBOOT

 

THE

 E-750

1.

Press the Menu button on the Control Panel to access the Functions menu.

2.

Use the Down arrow to scroll to Shut Down. Press the Set Button.

3.

Use the Down arrow to scroll to Reboot System. Press the Set button.

The E-750 will reboot.

Restarting the E-750

Restarting the E-750 resets the E-750 system software, but does not reboot the entire 
system. Network access to the E-750 is temporarily interrupted and all currently 
processing jobs are aborted.

T

O

 

RESTART

 

THE

 E-750

1.

Turn on the copier using the main power switch.

2.

Wait approximately three seconds, and press the Menu button on the Control Panel to 
access the Functions menu.

3.

Use the Down arrow to scroll to Shut Down. Press the Set Button.

4.

Use the Down arrow to scroll to Reboot System. Press the Set button.

If an error occurs during startup, the activity light will turn red. Check the Control 
Panel display for details of the error.

Summary of Contents for E-750

























































































































































































Reviews:

No comments