U
SING
THE
E-41
39
Network Status LEDs
Two LEDs next to the Ethernet connector indicate the network speed. When a data transfer
occurs between the E-41 and the network, the appropriate LED(s) blink to indicate network
activity. For additional network information, see
Configuration and Setup
on the
User Documentation CD.
Make sure that you connect the cable to the correct RJ-45 port (see
). The network and copier/printer interface cables look similar but are not
interchangeable. The network cable at the customer site is a
straight-through
Ethernet cable
that connects to the
upper
RJ-45 port on the E-41 back panel. The copier/printer interface
cable included with the E-41 is a 39.3 ft. Ethernet
crossover
cable that connects to the
lower
RJ-45 port on the E-41 back panel.
Network link speed
LED 1
LED 2
10 Megabits/second
Off
Green
100 Megabits/second
Green
Green
1000 Megabits/second
Amber
Green
LED 2
LED 1
Ethernet network port
(Upper RJ-45)
Summary of Contents for E-41
Page 156: ......
