T
ROUBLESHOOTING
120
T
ROUBLESHOOTING
This chapter identifies the source of common problems that may occur with the E-41 and
suggests ways of correcting the problems.
Troubleshooting process
The E-41 is a server for copier/printers, and is generally part of a configuration like the one
shown in the following figure. Problems may occur in one of three areas:
• Inside the E-41
• In the interface between the E-41 and the copier/printer
• In the interface between the E-41 and the workstations or computers to which it
is connected
F
IGURE
39:
Troubleshooting the system
This chapter does not attempt to provide troubleshooting information for attached computers
such as PCs or Mac OS computers, copier/printers, or extensive networks. Refer problems in
these areas to the appropriate service departments and network administrators.
When performing the service procedures described in this chapter, follow the precautions
listed in
.
The terms “replace” and “replacing” are typically used throughout this guide to mean
reinstallation of existing components. Install new components only when necessary. If you
determine that a component that you have removed is not faulty, reinstall it. Replacement
parts and specifications are subject to change. When ordering replacement parts, refer to the
current parts list maintained by your authorized service/support center. Install the correct
parts as directed by your service/support center.
E-41
Copier/printer
Networked computers
or workstations
The E-41 is one of several imaging products
engineered and manufactured by
Electronics for Imaging, Inc.
Summary of Contents for E-41
Page 156: ......
