4
4-9
Profile Manager
2.
Select DIC-new in the Simulation list, and click Profile Settings or double-click
DIC-new.
3.
Select the “Appear in Driver as” checkbox, choose one of the predefined custom
simulation names (Simulation-1 through Simulation-10) from the pop-up menu, and
then click Apply.
Make sure to choose a name that is not already linked with another simulation. If you
try to define two profiles with the same name, you will get an error message.
For an output profile, the predefined custom names would be Output-1 through
Output-10.
N
OTE
:
While you cannot delete a preset profile, you can use the name of a preset profile
name for your edited profile when you select the “Appear in Driver as” option. This
replaces the preset profile with your own profile.
When you choose Profile Settings for an output profile, the Use Calibration Set
option also appears. You must calibrate the Fiery 3850C with this calibration set
before this option has any effect. If you have never measured for this calibration set,
default measurements will be used. For more information about calibration sets, see
page 3-2.
In Profile Settings, you can also change profile descriptions for all non-locked profiles.