4
4-16
ColorWise Pro Tools
For greater precision, you can key in percentages in the Input and Output boxes or use
the arrow keys on the keyboard to adjust the curve. To use the arrow keys, you must
first click on the curve to establish an anchor point that serves as a reference.
9.
For an output profile, you can set maximum densities of the C, M, Y, and K channels.
You can enter the maximum densities, called D-Max values, of individual colors for
profiles that support density settings. D-Max settings are not available when editing
Simulation profiles in Master mode.
10.
When you are finished, click Save and enter a name for the new profile.
The new custom profile is saved to the Fiery 3850C with the new name. If you edit
one of the press standard targets (for example, SWOP-Coated, DIC, or Euroscale),
you may want to include the original name as part of the new target name (for
example, DIC-new) to help you remember the source of the new target.
N
OTE
:
Preset default profiles are locked and must be saved with a new name.
Custom profiles must be linked to one of the 10 predefined custom profile names
(Simulation-1 through Simulation-10 for Simulation or Output-1 through Output-10
for Output) in order to be accessible from the printer driver. You can create as many
custom profiles as you want, but a maximum of 10 are available from the printer driver
at any one time. See “Defining profiles” on page 4-8 for information on linking
custom profiles to the predefined custom profile names.
If you set a custom profile as the default, you can access it from the printer driver
without linking it to one of the predefined custom names. Select “Printer’s default”
from the printer driver.
Undoing simulation edits
You can undo the changes you made to simulations (master and linked) in these ways:
• If you have not yet saved your edits, click Done on the Color Editor menu bar,
and do not save the changes.
• If you saved your edits under a new simulation name and want to delete all edits to
• If you saved your edits under a new simulation name and want to undo the edits to
one or more linked simulation, use the following procedure.
