3
3-8
Color Calibration
Setting up the spectrophotometer
Before you calibrate the Fiery 3850C, you need to connect, configure, and calibrate
the spectrophotometer to prepare for measuring the printed patches (see “Calibrating
the X-Rite DTP32 densitometer” on page 3-28). For additional information about
setting up and using the DPT41, see the Instrument Operator’s Manual that came with
it.
T
O
CONNECT
THE
X-R
ITE
DTP41
TO
THE
COMPUTER
1.
Turn off the computer.
2.
Unpack the X-Rite DTP41, and remove the spacer from the measurement page slot.
3.
Plug the square end of the interface cable (looks like a modular phone plug) into the
serial interface connection on the side of the X-Rite DTP41.
Instrument button
LED indicator
Power input
Serial interface
connection
Alignment mark
Calibration strip
entrance
Measurement page slot
