manualshive.com logo in svg

Fiery 3850C, Color Manual

Share
Download
Fiery 3850C Color Manual Download Page 144

8

8-4

Page Layout Applications

T

O

 

DISABLE

 

COLOR

 

MANAGEMENT

 

FOR

 

A

 

BITMAPPED

 

IMAGE

1.

Select the bitmapped image in the document.

2.

Choose Image > CMS Source from the Element menu.

3.

Choose None from the This Item Uses menu and click OK.

Windows version requirement

For the Windows version of PageMaker 6.5, make sure a copy of the Fiery 3850C PPD 
file is in the following folders:

• PM65\RSRC\USENGLSH\PPD4

• Windows\System

Importing images

All RGB images placed in a document are affected by your RGB Source and Rendering 
Style settings. For best results with placed images, use the instructions in “Importing 
images” on page 8-2 and “CMYK simulation” on page 8-3.

Selecting options when printing

All print settings are specified from the Print dialog boxes in PageMaker 7.x or 6.5. 
The printer driver interface described in Chapter 1 is not used.

Summary of Contents for 3850C









































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands