Fiery 3850C Color Manual Download | Manualshive

Page: 28 / 200

background image

1

1-12

Fiery 3850C Color Management

PostScript printer driver for Windows computers

You can access the printer driver options described in this section by clicking
Start\Settings\Printers, right-clicking the appropriate printer, and selecting Properties
(Windows 9x/Me), Document Defaults (Windows NT), or Printing Preferences
(Windows 2000) from the pop-up menu. These settings are also accessible from the
Print Setup or Page Setup dialog boxes of most applications.

For Window 9x/Me, the Fiery 3850C driver interface enables you to save
combinations of settings that you can later access. In addition, you can choose
different settings for individual jobs from the applications you use.

The printer driver writes a PostScript file containing the instructions generated by your
application and the Fiery 3850C print options you selected. The printer driver sends
the PostScript file to the Fiery 3850C. The Fiery 3850C then performs PostScript
processing and color conversions and sends raster color data to the print device.

N

OTE

:

The following illustrations and instructions do not apply to all applications.

Many applications, such as Adobe PageMaker, Adobe Photoshop, Adobe Illustrator,
QuarkXPress, and CorelDRAW, have other color management options in addition to
those presented in the printer driver. For information on specific applications, see
Chapters 6 through 9.

«
...
26
27
28
29
30
...
»

Summary of Contents for 3850C









































































































































































































Reviews:

No comments

Related manuals for 3850C

Brand: EBS Pages: 4

Brand: NCR Pages: 38

Brand: TallyGenicom Pages: 3

ExpressCard 2000

Brand: Magtek Pages: 25

Brand: Oki Pages: 154

Brand: Oki Pages: 121

Brand: Oki Pages: 52

Brand: Oki Pages: 96

WorkCentre 5325

Brand: Xerox Pages: 160

WorkCentre 5016

Brand: Xerox Pages: 2

WorkCentre 490cx

Brand: Xerox Pages: 258

WorkCentre 4260 Series

Brand: Xerox Pages: 210

WorkCentre 3550

Brand: Xerox Pages: 32

WorkCentre 3315DN

Brand: Xerox Pages: 191

WORKCENTER 5222

Brand: Xerox Pages: 28

VersaLink C71 Series

Brand: Xerox Pages: 247

VersaLink C7000

Brand: Xerox Pages: 2

Brand: Xerox Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands