manualshive.com logo in svg

Fiery 3850C, Color Manual

Share
Download
Fiery 3850C Color Manual Download Page 45

2

2-9

Advanced workflows

Photoshop RGB with Illustrator and QuarkXPress CMYK and PANTONE colors

This workflow involves short-run printing of a complex page layout with images 
saved in Photoshop, illustrations created in Illustrator, and PANTONE spot colors. 
A Photoshop image is saved in an RGB color space using the EPS file format. 
Illustrator artwork contains objects defined as CMYK and as PANTONE spot colors 
selected from printed output, and they are saved using the Illustrator EPS file format. 
After all of these individual objects are imported into QuarkXPress, additional design 
elements in QuarkXPress are colored using CMYK process colors or PANTONE spot 
colors. Use the settings illustrated in this workflow for printing brochures, newsletters, 
and other layouts.

N

OTE

:

Anytime you place CMYK colors in a document, select them from printed 

output (see page 2-3).

This document could be created as follows:

• Create an RGB image in Photoshop and save it as Photoshop EPS. 

• Create a graphic in Illustrator using CMYK and PANTONE colors and save as 

Illustrator EPS. 

• Use CMYK colors and a PANTONE color in a QuarkXPress document. 

• Import the Illustrator EPS into QuarkXPress and place the Photoshop EPS image. 

• Print the QuarkXPress document to the Fiery 3850C. 

• Use ColorWise to convert the RGB image to printer CMYK, to adjust the process 

colors for short-run printing, and to match the PANTONE spot colors using the 
full printer gamut. 

Summary of Contents for 3850C









































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands