Full version of the manual is available at www.posnet.com.
This manual describes basic printer elements, installation of
standard controllers and connecting the printer to a computer.
Description of installation and configuration of controllers
(USB(NET)) for online connections has been described in the
Quick OnLine instruction attached to the package.
Exchanging paper
1
Press the open button so that the lid pops up.
2
Place the roll in the paper chamber. Paper's end should be placed
so that a couple of centimeters extends beyond the stalk.
3
Close the printer's lid.
Manual installation of controllers
Installation of printer's controllers ends with establishing a virtual COM
port to facilitate communication with a computer via USB. This is an
automatic process upon connecting the printer to a computer.
Installation can start by clicking with the right mouse key on the
controller's file featuring INF extension, and next selecting Install from
the menu.
Controllers are on a CD (it should be in the box with the printer) and the
most up-to-date version can be downloaded from the posnet.com
website.
Setting communication interface
Using
[UP]
/
[DOWN]
keys select from printer's menu:
„
2 Konfiguracja
” „
2 Konfig. połączeń
” „
1
Usługi PC
”
„
1 Interfejs PC
”, where each item should be confirmed with
[OK].
1
2
Next, using the same keys select an interface (USB, COM1,
COM2, TCP/IP).
3
If the POSNET protocol was selected specify standard of Polish
characters (Windows 1250, Latin 2 or Mazovia).
4
Confirm with
[OK]
.
The printer will restart.
1
2
3
Document version 1.3
The printer can be optionally fitted in a WiFi / Bluetooth adapter.
POSNET POLSKA S.A., as the manufacturer, hereby declares that
the WiFi/BT TEMO device is conform with provisions of 2014/53/EU
Directive.
Full text of the EU conformity declaration is available at:
http://www.posnet.com.
