Festo Smart cubic CPVSC1-VI, Manual

Page: 48 / 92

3. Installation
3−18
Festo P.BE−CPVSC−E N en 0301a
3.3.5 Connecting the electric cables
Warning
Use only power units which guarantee reliable isolation of
the operating voltages as per IEC 742/EN 60742/VDE 0551
with at least 4 kV isolation resistance (Protected Extra Low
Voltage PELV). Switch power packs are permitted, provid
ing they guarantee reliable isolation in accordance with
EN60950/VDE0805.
Please note:
By the use of PELV power units, protection against electric
shock (protection against direct and indirect contact) is guar
anteed with the Festo valve terminals in accordance with
EN60204−1/IEC 204. Safety transformers with the adjacent
symbol must be used for supplying PELV networks. The valve
terminals must be earthed to ensure that they function cor
rectly (e.g. EMC).
Please note
Check within the framework of your EMERGENCY STOP
circuit, to ascertain the measures necessary for putting
your machine/system into a safe state in the event of an
EMERGENCY Stop (e.g. switching off the operating voltage
for the valves and output modules, switching off the com
pressed air).
CPV−SC valve terminal with multipin connection
Connecting the multipin cable
Caution
Long signal cables reduce the immunity to interference.
Do not exceed the maximum permitted signal cable length
of 10 m.