Festo Smart cubic CPVSC1-VI, Manual

Page: 26 / 92

2. Fitting
2−4
Festo P.BE−CPVSC−E N en 0301a
2.1 General instructions on fitting and dismantling
Warning
Sudden unexpected movement of the connected actuators
and uncontrolled movements of loose tubing can cause
injury to human beings or damage to property.
Before carrying out installation and maintenance work,
switch off the following:
the compressed air supply
the operating and load voltage supplies.
Please note
Handle all the components on the CPV−SC valve terminal
with care. Please note especially the following:
The specified torques must be observed.
Electrostatically sensitive components.
Do not therefore touch any contact surfaces.
2.2 Fitting variants
The CPV−SC valve terminal with individual tubing has already
been prepared for integration in a system or machine fitted in
one of the following ways:
Fitting onto a wall
Please note
Fit the CPV−SC valve terminal so that there is sufficient
space for heat dissipation and ensure that the maximum
limits for temperatures are observed (see Technical
specifications").